Summary
Overview
Work History
Education
Skills
Timeline
Generic

Farley George

Ngeruliang

Summary

Dynamic welder with extensive experience at AGCO Corp., skilled in MIG, TIG, and Stick welding. Proven attention to detail and fabrication expertise led to enhanced production efficiency and reduced workplace accidents. Adept at blueprint reading, I consistently delivered high-quality results while fostering teamwork and maintaining a safe work environment.

Overview

18
18
years of professional experience

Work History

Welder

AGCO Corp.
03.2012 - 02.2025
  • Welded in flat, horizontal, vertical, and overhead positions.
  • Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
  • Demonstrated versatility in various welding methods including MIG, TIG, Stick, and Flux Core Welding techniques.
  • Fabricated shop parts directly from blueprints.
  • Inspected welds and checked critical measurements to meet specifications.
  • Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
  • Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
  • Prepared welding equipment to perform advanced welding work.
  • Enhanced welding quality by following precise welding procedures and maintaining proper equipment settings.
  • Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
  • Utilized blueprints and diagrams to compare finished products against design specifications.
  • Reduced workplace accidents through strict compliance with safety regulations and guidelines.
  • Increased production efficiency with expert time management skills and adherence to project deadlines.
  • Delivered high-quality customer service as a reliable and skilled welder, contributing to positive company reputation and repeat business.
  • Assisted in blueprint reading and interpretation for accurate alignment of parts during assembly process.
  • Collaborated with team members for seamless project execution, improving overall productivity.
  • Chipped off excess weld, slag, and spatter using hand tools.
  • Provided support in developing custom jigs/fixtures to facilitate more efficient production workflows.
  • Developed customized welding techniques for unique materials, optimizing fabrication processes.
  • Salvaged and rebuilt parts to achieve cost savings and reduce waste.
  • Troubleshot technical issues during the welding process, minimizing downtime on projects.
  • Addressed potential hazards or equipment malfunctions to prevent serious problems.
  • Maintained high standard of quality control, ensuring all welds met or exceeded industry standards.
  • Welded metal components in vertical, overhead and flat positions.
  • Maintained safety by wearing protective equipment, staying alert and following procedures.
  • Bolted, clamped and tack-welded parts to secure components prior to welding.
  • Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
  • Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.

Asbestos Supervisor

New Horizon Inc.
05.2009 - 11.2012
  • Conducted post-abatement inspections to verify that all hazardous materials had been removed successfully before reoccupancy of the site was permitted.
  • Assisted in obtaining necessary permits and approvals from relevant agencies before commencing work on projects.
  • Provided accurate cost estimates for clients, ensuring transparency in project pricing and contract negotiations.
  • Addressed any unforeseen challenges during the course of a project quickly and efficiently, minimizing delays or additional costs.
  • Enhanced team efficiency by providing comprehensive training for asbestos removal workers.
  • Improved workplace safety by conducting regular inspections and maintaining up-to-date equipment.
  • Maintained detailed records of all project activities, helping clients track progress toward regulatory compliance goals.
  • Supervised a team of asbestos workers, fostering a positive work environment conducive to productivity and high-quality results.
  • Managed multiple projects simultaneously, prioritizing tasks based on deadlines and project requirements.
  • Ensured compliance with federal, state, and local regulations through consistent monitoring and reporting of job progress.
  • Evaluated site conditions to determine the most appropriate asbestos abatement methods for each project.
  • Utilized industry best practices for containment setup, minimizing potential exposure risks during the abatement process.
  • Complied with environmental laws and regulations concerning asbestos and hazardous waste removal.
  • Utilized power tools during asbestos removal to completely remove hazardous materials.
  • Identified materials requiring removal or special handling.
  • Verified OSHA compliance for worksite and coworkers to establish safe environment.
  • Utilized personal protective equipment during building demolition and asbestos removal.
  • Assembled and positioned decontamination areas at exits of job sites to prevent harm to bystanders and unprotected persons.
  • Softened and removed asbestos by spraying then scraping asbestos off surfaces.
  • Oversaw daily operations at site, keeping team production moving at optimal pace.
  • Inspected equipment and tools used for safe operation.
  • Trained workers in proper methods, equipment operation and safety procedures.
  • Prepared and submitted reports on job progress and safety conditions to upper management.
  • Created and implemented plans to maximize efficiency of workers.
  • Provided feedback to workers on job performance and safety procedures.
  • Administered disciplinary actions to workers violating safety regulations and company policies.

Warehouse Forklift Operator

Associate Produce
05.2007 - 05.2009
  • Wrapped pallets in plastic wrap and attached merchandise tags to prepare for shipping.
  • Built pallets and loads for partial and mixed pallets, wrapped finished pallets and staged pallets and loads into truck when ready for shipment.
  • Worked with racking systems and loaded or unloaded pallets, pulling and placing pallets on or off of vertical product racking systems and trucks, maximizing storage by stacking products vertically.
  • Received products using frequency scanners, unloaded shipments from trucks and fulfilled and organized orders to streamline customer delivery processes.
  • Unloaded and stacked materials by raising and lowering lifting devices.
  • Optimized warehouse space utilization by effectively stacking pallets using a forklift, maximizing storage capacity without sacrificing accessibility or safety.
  • Ensured timely deliveries by efficiently loading and unloading trucks with the use of forklifts.
  • Maintained an organized warehouse by systematically arranging products using a forklift according to company guidelines.
  • Contributed to the reduction of workplace accidents by adhering to strict safety protocols during all forklift operations.
  • Participated in regular safety meetings, staying up-to-date on best practices in regards to safe and efficient operation of a warehouse forklift.
  • Improved overall warehouse cleanliness, routinely clearing debris from aisles with the use of attachments on the forklift.
  • Supported the shipping department with prompt loading and unloading tasks utilizing a variety of specialized attachments on the forklift as needed.
  • Fostered positive working relationships with colleagues and supervisors, promoting teamwork and collaboration within the warehouse environment while executing daily forklift tasks.
  • Kept up-to-date on company policies and procedures relating to forklift operations through continuous training sessions and self-directed learning.
  • Turned in paperwork outlining orders for inspection before loading, marking load tickets for out of stock items, withholding or completing orders as necessary and inspecting trucks before departure.
  • Assisted with periodic physical inventory counts, ensuring accuracy and integrity in stock records through meticulous tracking of items moved via the use of a warehouse forklifter.
  • Safeguarded quality of products stored in the warehouse by ensuring proper stacking techniques and adherence to weight restrictions while operating a forklift.

Education

Some College - General Electronics

Palau Community College
Koror Palau

Skills

  • Welding
  • Attention to detail
  • Fabrication
  • Blueprint reading
  • Pipe welding
  • Arc welding
  • Flat welding
  • Horizontal welding

Timeline

Welder

AGCO Corp.
03.2012 - 02.2025

Asbestos Supervisor

New Horizon Inc.
05.2009 - 11.2012

Warehouse Forklift Operator

Associate Produce
05.2007 - 05.2009

Some College - General Electronics

Palau Community College

Similar Profiles

CREATE PROFILE
Farley George